fbpx

Mini Cart

Sale

PreSonus Temblor T10

 48,990.00  43,990.00

  • Active studio subwoofer with 10″ reinforced-composition woofer
  • Plenty of punch and impact from 250 watts of Class AB power
  • Flexible connectivity, with balanced XLR and TRS inputs and unbalanced RCA inputs
  • Pass-through on balanced XLR or TRS for connecting main speakers, with 100Hz highpass switch
  • Variable input gain and lowpass filter, plus switchable phase and ground lift

Description

To hear what’s really going on at the bottom of your mixes, you need a subwoofer that speaks the truth. The Temblor® T10 lets you take charge of the low-frequency foundation of your mix with a combination of quality components and design, plenty of inputs and outputs, and extensive user controls not normally available in this price range.

Customize your system until it’s just right.
The T10 provide more user controls than any other subwoofer in their class, enabling seamless integration into your listening environment.

Versatile I/O works with any setup.
No other subwoofer anywhere close to the Temblor’s price range offers a comparable selection of inputs and outputs.

Features:
Main components

  • 10-inch, front-firing, glass-composite low-frequency transducer
  • Front-firing, bass-reflex acoustic port

Controls and filters

  • Input gain control (-30 dB to +6 dB, continuously variable)
  • Continuously variable lowpass filter (50 Hz to 130 Hz)
  • Built-in crossover
  • Switchable highpass filter removes frequency content below 80 Hz from the full-range signal sent from the Temblor outputs to the main monitors
  • Momentary footswitch (included) bypasses the subwoofer, highpass filter, and Sub Out
  • Polarity invert
  • Ground-lift switch

 

Power and safety

  • T10: 250 watt, Class AB amplification
  • Internal damping and heat sink
  • Integrated rubber feet for stable placement

 

Inputs and outputs

  • Left and right, balanced XLR and ¼” TRS and unbalanced RCA main inputs
  • Left and right balanced XLR and ¼” TRS outputs
  • XLR subwoofer output for connecting a second T10

 

Specifications:
Inputs

  • 2 – Balanced XLR
  • 2 – Balanced 1/4″ TRS
  • 2 – Unbalanced RCA

 

Outputs

  • 2 – Balanced XLR (full range with 80Hz HPF option)
  • 2- Balanced ¼” TRS (full range with 80 Hz HPF option
  • 2- Unbalanced RCA (full range with 80 Hz HPF option)

 

Performance

  • Frequency Response 20 Hz – 200 Hz
  • Low Pass Filter Frequency 50 – 130 Hz (variable)
  • Signal-to-Noise Ratio >98 dB (A weighted)
  • THD 0.019% @ power <160W
  • Amplifier Power 250W peak, 170W RMS
  • Power Consumption 230W
  • Amplifier Type Class AB
  • Peak SPL at 1m 113 dB
  • Woofer 10” glass-composite, Front-firing
  • Acoustic Port Front-firing bass reflex

 

User Controls

  • Input Gain Range -30 to +6 dB
  • Polarity Switch 0° or 180°
  • Low Pass Filter Control 50 Hz to 130 Hz
  • Ground Lift Switch On/Off
  • High Pass Filter Switch On/Off
  • Bypass Footswitch On/Off

 

Protection

  • RF interference
  • Output-current limiting
  • Over-temperature
  • Turn-on/off transient
  • Subsonic filter
  • External mains fuse

 

Power

  • 100-120V ~50/60 Hz or 220-240V ~50/60 Hz

 

Cabinet

  • Vinyl-laminated MDF

 

Physical

  • Width 12.6” (320 mm)
  • Depth 15.75” (400 mm)
  • Height 15.75″ (400 mm)
  • Weight 39.46 lbs (17.9 kg)

Reviews

There are no reviews yet.

Be the first to review “PreSonus Temblor T10”

Your email address will not be published. Required fields are marked *